COMPUCARE
Data Logger

Data Logger

Send Inquiry

Wireless Data Acquisition System

Brief Introduction: 

The Wireless Data Logger System CC280 is a cost effective remote terminal unit. It inbuilt quad bandGSM/GPRS module (Or WCDMA/CDMA2000) , ISM Band 433Mhz Radio Frequency module, and ARM®CortexTM 32 Bit RISC Core. It is a multi Isolation I/O port remote terminal unit and Wireless Data LoggerSystem.The Wireless Data logger system CC280 can be used for monitoring maximum 400 distributed I/O endpointsthough maximum 50 wireless Data Acquisition Modules by RF 433Mhz wireless network. Also it can be usedas for converting the meters, transducers, Data Acquisition modules, PLC data via RS485 serial port to 433MHz wireless network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired– wireless – SMS/GPRS/ 3G/Ethernet/RS232/RS485 gateway. The range covers about 2~5Km, plus CC-02Wireless repeaters can increase the wireless distance.The Wireless Data logger system CC280 equips 4 digital inputs, 2 solid relay outputs, power status detectionmoulde, and onsite temperature and humidity inputs. All of the inputs and outputs are isolation.The Wireless Data Logger System CC280 can be used as Wireless SMS Alarm, when the equipped I/O or400 distributed I/O alarm occurrence, it also can send pre-definition SMS to up to 10  users.The Wireless Data Logger System CC280 is suitable for lots of applications, e.g.: Wireless data logging, BTSmonitoring, remote data acquisition, telemetrically, farm, energy saving, agriculture, automatically meterreading system, weather station, storage, factory and other applications.The Wireless Data Logger System CC280 supports Modbus RTU Slave, Modbus TCP, TCP/UDP, SMSand data transparent transmission protocol through RS232/RS485/GSM/SMS/GPRS/3G./Ethernet.

The Wireless Data Logger System can be used as:

A Wireless Data Logger System. Supports monitoring up to 50 wireless data acquisition module for

maximum 400 endpoints by 433Mhz wireless network, the range covers about 2~5Km, plus CC-02

Wireless repeaters can increase the wireless distance. Each endpoint can be setup threshold value or

alarm conditions, once the value exceed threshold value or activated will send out SMS to alert the

users immediately.

A Wireless Gateway. Though the CC-01 wireless data transfer unit, it can convert the meters,

transducers, Data Acquisition modules, PLC data via RS485 serial port to 433 MHz wireless

network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired –

wireless – SMS/GPRS/ 3G/Ethernet/RS232/RS485 gateway. 

A SMS Alarm Controller. The IO activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each input can have its own message texts and the message can be programmed by users. 

 A Timer-Switch which can be activated automatically. It can be setup when to performs preset

logic events, e.g.: timer reports its status, timer switch on/off device or equipments  automatically. 

Suitable Applications:

1. Security Alarm System applications;

2. Supervision and monitoring alarm systems

3. Automatic monitoring system;

4. Vending Machines;

5. Pumping Stations;

6. Buildings and Real Estate;

7. Weather Stations remote control and data logging;

8. River Monitoring and Flood Control remote control;

9. Oil and gas pipelines remote control and data logging;

10. Corrosion protection